Titanium Grade 1
Titanium Grade 1 Pipes
Titanium Grade 1 Strips
Titanium Grade 1 Plates
Titanium Grade 1 Bars
About Titanium Grade 1
What is Titanium Grade 1?
Titanium grade 1 is “unalloyed” titanium with the best ductility and cold formability.
Titanium grade 1 also referred to as the UNS R50250 commercially pure titanium.
It has good mechanical properties and high corrosion resistance. Commercial CP grade pure titanium has high resistance to salt water and a variety of corrosive media (chlorine, nitric acid, etc.). Because titanium has a high chemical affinity, when it reacts with oxygen, it will form a stable and long-lasting protective oxide layer on the surface.
Grade 1 titanium stands out with its low specific gravity and excellent mechanical properties. Generally, it is most needed in application fields that have higher requirements for deformability.
Grade 1 titanium is widely used in plate heat exchangers or tube plates, and explosive coating of composite plates.
Grade 1 titanium is available in the form of pipe, round bar, forging, wire, plate, strip and foil section.
Titanium Grade 1 Standards
-Seamless Pipe & Tube
-Rod & Bar
-Plate, Sheet, Strip & Foil
Titanium Grade 1 Chemical Composition
Titanium Grade 1 Data Sheet
Titanium Grade 1 Equivalent Grades
|Ti Grade 1||3.7025||R50250||–||–||–||–||–||–|
Titanium Grade 1 Mechanical Properties
|Density||Melting Point||Tensile Strength||Yield Strength (0.2%Offset)||Elongation|
|4.51 g/cm3||1670°C (3040°F)||240Mpa||170-310Mpa||24%|
Titanium Grade 1 Applications
Get A Free Quote Now
Got a question? Contact our team!
Looking For a Trust Nickel Alloys & Stainless Steel Manufacturer？
At SEATHER, we are experts in the field of alloys manufacturing. As such, we offer a variety of services to ensure your project is formed to your exact requirements.